For paper shorter than the following length, the paper exit opening is opened neither in the non-staple mode nor the staple mode. Door switch control The FS transfer drive control is started when transmitting the start signal from the main body. L size gate When folding the paper, the conveyance path is switched back and forth for each paper conveyance to prevent the succeeding paper from coming into contact with the trailing edge of the L size paper that is in folding pro- cess. Functions 1 Functions Accelerated conveyance To accelerate for the finisher standard line speed. Shift operation During conveying the paper to the main tray , the crank mechanism  shifts the shift movable section  including the shift roller  approximately 30 mm backward  to shift and exit the paper when shift roller motor M2  rotates.
|Date Added:||1 May 2008|
|File Size:||52.2 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Sub tray mode fdtoc Paper through from the PI Paper through from the main body paper exit Windows 95 Microsoft Windows Page 68 Theory of Operation Ver1.
At this time, the upper surface of the cevelop shift paper does not come to the same level as the lower edge of the job partition plate and the 1st sheet of the shift paper is in possibility of getting into the lower side of the job partition plate. Theory of Operation Ve1.
The stack assist plate  is driven by the stack assist motor M Page Revision history After publication of this service manual, the parts and mechanism may be subject to change for improvement of their performance. The overlap mechanism is the mechanism to overlap the paper in adequate paper conveyance order.
A risk of product trouble, injury, and fire exists. Specifications and accessories are based on the information available at the time of printing and are subject to change without notice. This reliability is oneo through high-quality design and a solid service network.
Windows 10 – DEVELOP | Europe
Revision history After publication of this service manual, the parts and mechanism may be subject to change for improve- ment of their performance. Functions 1 Functions Accelerated conveyance To accelerate for the finisher standard line speed. Sub tray gate Switching is made between the main tray paper exit and the sub tray paper exit by the sub tray gate solenoid SD9.
Please note that by deleting deveoop cookies or disabling future cookies you may not be able to access certain areas or features of our site. Two types of the front stoppers, more specifically, a movable type and a stationary type, are employed. Standard printer 2 bizhub PRO Paper weight Plain paper Develo; photo paper Selecting the punch mode, M rotates to move the punch unit  so that the paper size sensor PS  of the punch unit  is positioned 5 mm inward  from the side edge of the paper.
Mechanism The trimmer paddle  is provided to prevent the saddle-stitched paper from creating trails with scraps by get- ting into the paper during the press operation, and to drop the scraps forcibly. When exiting the 1st sheet of paper into the sub tray, switch the SD9 a specified period of time after the start button is turned ON.
For more details, or to find out how to disable cookies please follow this link.
Type Type Conveyance unit with paper cooling and decurler functions B. After the 2nd folding conveyance ieno PS53 turns ON, the paper is conveyed by a specified number of steps. When stapling 2 sheets of paper for 3 copies, SD5 operates as follows.
The FNS transfer motor M1 drives the shift roller. Type Type Side mount type large volume paper feed tray B.
ineo+ – Develop
The pin at the tip  of the stapling arm pushes up the sta- pling blade  to push out the staple , punch out the paper  and staple it.
To assist the separation of paper released from the grip, the paddle is rotated at a high speed.
Page 30 Theory of Operation Ver1. Theory of Operation Ver1. The number of the stacked sheets is different depending on its paper weight and the convey- ance pattern. Bypass gate control The bypass gate only operates for the small size paper A4, B5, and 8 x 11 in the stapling mode. For this reason, when the switching cam is rotated clockwise, the punching blade is driven downward and when the cam is rotated counterclockwise, the punching blade is not driven.
Control 1 Trimming mode The bundle press movement motor M17 rotates in the reverse direction to move the bundle press section to the paper conveyance position  after specified period of time since the bundle clip motor M11 starts convey- ing the paper . PK 2 to 3 holes       15kjt2enb Punch motor M Groove of the switching cam Eccentric cam Projection of the punch blade Slide link  Projection of the switching cam Switching cam