Reboot the system to attach the new driver, and then recheck the bindings. A given FC port can be used as an initiator or as a target, but not as both. The qlt driver attaches during reboot. Setting Up Disks Tasks. However after reading this you ought to be able to handle this with your eyes closed, well maybe not with your eyes closed.
|Date Added:||9 May 2012|
|File Size:||44.65 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Problem changing specific QLogic port to qlt (COMStar)
Managing File Systems Overview. Ensure the following prerequisite step has been completed: In this example, the qlc driver is actively bound to pci, Setting Up Disks Tasks. Accessing Removable Media Tasks 4.
Reboot the system to attach the new driver, and then recheck the bindings. Then, from the Action menu, choose Rescan Disks. This message does not indicate an error.
Adventures in ZFS: Configuring Fibre Channel Targets
Now from your client you ql see your storage as a block device. Before making changes to the HBA ports, first check the existing port bindings. The qlc driver works only in initiator mode, and cannot be used for target mode. You will need to perform a scan or a refresh from the client.
This message comsta not indicate an error. All subsequent LUNs appear in the format output, because the script forces the initiator to touch all the LUNs through all the ports. You must remove the existing binding for qlc before you can add that binding to a new driver. Copying Files and File Systems Tasks. The steps are run on the host.
Your browser security needs to be updated
Reboot the system to attach the new driver. Because initiator mode and target mode use different drivers, the driver you attach to an HBA port defines its function as a target or initiator. Creating and Mounting File Systems Tasks.
This example shows the device paths for a single HBA with two ports. The qlt driver qly during reboot. Remove the current binding.
Be the first to comment. Qt that the LUN is visible on other systems. In this example, the qlc driver is actively bound to pciex, You can get the software, see the release notes, reference manual, and The qlt driver attaches when the system is rebooted. If you still do not see the LUNs, ensure that the service is enabled on the target by using the svcs stmf command. Of course a working fabric and clients in order to utilize the storage.
Managing Tape Drives Tasks. The qlt driver attaches when the system is rebooted. No Services to restart: Managing Removable Media Overview. Thu Jul 2